T-Post Driver System

‍ ‍

‍ ‍The only waist-level powered T-post driver.

How it Works:

1. Install the ball-nosed bit into the jackhammer.

2. Slide the T-Post Driver Collar onto a post and rest it on a stud towards the bottom of the post.

3. Pick up your jackhammer, guide the ball-end of the bit into the socket on the collar, then pull the trigger and hammer away!

In the box:

• Collar: Forged high-grade steel. Will work with all lengths and gauges of T-post from .83lb/ft to 1.5lb/ft, as well as Y-posts with teeth

• Bit: Will come with a radius where the round sections meet the Hex (pictures to come) for increased resilience.

note: The coloration on the bit resulted from an additional post-plating heat treatment process, which adds to its strength.

• Jackhammer: JH-65B 1700-Watt, 120V, 1900BPM, 60-Joule; 30mm (1-1/8” round top) hex; shock/vibration-absorbing handle; weight (no bit, no oil): 32lb

• tool kit

• 4oz gearbox oil (not pictured)