Round T-Post Driver Attachment

$119.00

The coolest gadget in fencing.

How it works

Install the round-nosed jackhammer bit into a 30mm hex-shank jackhammer. Slide the collar onto a post and set the collar towards the bottom of the post. Then pick up your jackhammer and set the end of the bit into the socket on the collar and hammer away.

Improvements

For 2025, we made the collar 1/8” thicker throughout, and it is now forged instead of cast, making it roughly twice as strong. The collar and bit are made of similar high-grade heat-treated steel, and they are now chrome-plated.

note: The color of the jackhammer bits is an oxide layer that resulted from an additional heat-treating process for increased strength.

The coolest gadget in fencing.

How it works

Install the round-nosed jackhammer bit into a 30mm hex-shank jackhammer. Slide the collar onto a post and set the collar towards the bottom of the post. Then pick up your jackhammer and set the end of the bit into the socket on the collar and hammer away.

Improvements

For 2025, we made the collar 1/8” thicker throughout, and it is now forged instead of cast, making it roughly twice as strong. The collar and bit are made of similar high-grade heat-treated steel, and they are now chrome-plated.

note: The color of the jackhammer bits is an oxide layer that resulted from an additional heat-treating process for increased strength.

  • The only t-post driver that does not require lifting heavy weight over your head for every post.

  • New upgraded collar and specialty round-nosed bit.

  • Made from high-grade forged, heat-treated and chrome-plated steel.

  • Works with standard t-posts and Y-posts with teeth.

  • 100% guaranteed as long as you own it.

  • *Will not drive posts through solid rock or concrete.

  • *Need to provide your own 30mm hex-shank jackhammer.